Hitachi DZMV350A Camcorder User Manual


 
66
English
QR34642
RECORDING IMAGE FROM AV DEVICE
1 Set the input source on the
DVD video camera/
recorder to “LINE (L IN)”.
Switch the input referring
to “Input Source” on
page 88.
2 Turn on the connected device, and start
playback.
The picture will appear on the LCD screen or
viewfinder of this DVD video camera/recorder.
3 Press the REC button.
Recording will start on this DVD video camera/
recorder.
The operation of this line-input recording is the
same as for recording movie.
Note:
The recorded contents can be played back in the same
manner as when playing back camera images recorded
on this DVD video camera/recorder.
Still images can also be recorded on DVD-RAM disc or
card. See “Switching External Input Recording Method
(PHOTO Input)” on page 88 for details, and “Recording
Stills” on page 53 for how to record still images.
The “Input Source” setting will return to “CAMERA”
whenever DVD video camera/recorder is turned off.
Recording of most images is prohibited by the copy-
guard signal to protect the copyright, except for images
recordedoncamcordersforpersonalenjoyment.“COPY
PROTECTED”appearsintheseimages:Theycannotbe
recorded on this DVD video camera/recorder.
TypicalcopyrightprotectedimagesincludethoseofDVD
video, LD, recorded video tapes, some parts of digital
satellite broadcasts, etc.
If a video signal that cannot be read by this DVD video
camera/recorderispresent-eveninimagesrecordedon
camcorder for personal enjoyment without copy-guard
signal - the input image may not be recorded normally.
Ifthe input signal is interrupted byswitching the channel
onTVorswitchingthesignalusingvideoselector,normal
recording cannot be performed.
8:00AM
9/30/2003
3 0 MIN
0:00:00
REM
FINE
L IN