Hitachi DZMV350A Camcorder User Manual


 
83
English
QR34642
USING THE ELECTRONIC IMAGE STABILIZER (EIS)
This DVD video camera/recorder is equipped with an electronic image stabilizer function: When you use
zoom to record a magnified subject image, it will correct fuzziness in the recorded image.
1 Press the MENU button,
choose “EIS” on the
“Camera Functions
Setup” menu screen, and
then press the
button.
2 Choose the “On” or “Off”, and then press the
button.
3 Press the MENU button to end the setting.
Checking EIS On or Off
You can check EIS On or Off by the on-screen
information display.
After recording with EIS set to “Off”, it is
recommended that you return the setting to “On”
and then turn the DVD video camera/recorder off,
unless you normally record with “Off” setting.
This function is effective only during movie
recording: It will not work during still recording.
Note:
The EISsetting willbe storedin memory even when the
DVD video camera/recorder is turned off.
Although you can switch EIS between on and off during
still recording, the setting will be effective only during
movie recording.
Itisrecommendedthatyouspecify “EISOff” whenusing
the DVD video camera/recorder on a desk or tripod.
When “EIS On” is specified, there will be a slight
difference between the actual movement and the
movement on screen.
Grosscamera shake maynotbe entirelycorrectedeven
if “EIS On” is specified.
EIS may not operate correctly when the tele or wide-
conversion lens (generally available) is used.
Ca
m
era Functions Setup
Progra
m
AE
W
hite Bal.
Dig.Z
oom
EIS
Off
On
ENTER RETURN
RAM
MIC.Fi lter
8:00AM
9/30/2003
3 0 MIN
0:00:00
REM
FINE
EIS