Filter
Top Products
v Select Set page layout options to specify the page size, orientation, and margins,
as described in “Initial APU Setup” on page 14.
v Select Define overlays to name the overlay that you want merged with the
application data on the page.
v Select Define page segments to include the company logo in the output.
v Select Define field mapping to map spooled file data to the output page.
Most of these steps are illustrated below. You can perform the steps in any order,
as long as you select a sample spooled file first.
Selecting a Sample Spooled File
Use the Select a sample spooled file option to specify the name of the spooled file
that contains the output of the billing application.
Note: This action was performed previously in step 2a on page 39. This can be
used to make changes to existing print definitions, rather than using the
Define option.
Page Layout Options
To set page layout options, type 1 next to that option to display the panel that is
shown in Figure 41. This panel enables you to define page layout options for the
*ORIGINAL copy. These options include input drawer for this copy, page
dimensions and options, and the use of a constant back overlay (back side overlay
without application data).
Page Layout Options You can Set
You can specify the following page layout options:
v The input drawer from which the paper is to be drawn
v Line and column increments for this page, such as six lines per inch for each line
and ten characters per inch for each column
v Page length and width
v Page margins and orientation; in this example, all zeroes
Setting up Duplexing
Notice that you can specify duplex printing.
Set Page Layout Options
Print Definition . . . SUNSD1 Page Format.....: *DEFAULT
Library . . . . . . . QAPU Copy . . . .....: *ORIGINAL
Type choices, press Enter.
Input drawer . . . . . *DEFAULT *DEFAULT, 1, 2, 3, 4
Default line increment *PRTDEF *INCH *PRTDEF, *INPUT, Value
Default Column inc. . . *PRTDEF *INCH *PRTDEF, *INPUT, Value
Page length...... 11 *INCH *PRTDEF, *INPUT, Value
Page width . . . . . . 8.5 *INCH *PRTDEF, *INPUT, Value
Top margin (down) . . . 0 *INCH *PRTDEF, 0, Value
Left margin (across) . 0 *INCH *PRTDEF, 0, Value
Page orientation . . . 0 *PRTDEF, *INPUT, 0, 90...
Duplex printing . . . . 1=Yes, 2=Tumble
Back overlay . . . . . *NONE *NONE, Name F4 for list
Position across . . . *INCH 0, Value
Position down . . . . *INCH 0, Value
F3=Exit F4=Prompt F12=Cancel F22=Set Units
Figure 41. Set Page Layout Options panel
42 APU User’s Guide