IBM S544-5351-03 Photo Scanner User Manual


 
When you map a field, the mapping is displayed as follows:
Table 1. Field Mapping Values
1s Bar code
2s Text
4s Suppression
1/2s Bar code and text overlapped
1/4s Bar code and suppression overlapped
Note: If you want to edit a field you have previously mapped more than once (for
example, mapping both bar code and text, or both bar code and suppression
for a field), position the cursor on the mapped field and press Enter. The
Edit Text Mapping panel appears allowing you to choose which mapping
you want to edit, as shown in Figure 50.
Using the Repeat Function
In addition to changing the formatting attributes and position of the mapped data,
you can also use the Repeat function on this display to copy the formatting
attributes from the selected field to other fields. In this example, you want to use
the same formatting attributes for the three address lines as you did for the
customer name, so you can press F15 to open the Repeat Text Mapping panel.
Define Field Mapping
Spooled file . . . . : INVSCS Page/Line......: 1/1
..............................................................................
: Edit Text Mapping :
: Type choices, press Enter. :
: From Row / Column : 12 / 12 :
: Mapping .....: 1/ 1 :
: Length . . . . . . 22 :
: Position across . . 1.1 *INCH Value :
: Position down . . . 2 *INCH Value :
: Font family.... HELVETICA *PRTDEF, Value F4 for list :
: Point size . . . 12 *CALC, Value :
: Bold . ..... 1 1=Yes :
: Italic ..... 1=Yes :
: Rotation ..... *DEFAULT *DEFAULT, 0, 90, 180, 270 :
: Color . . . . . . . *PRTDEF *PRTDEF, Value F4 for list :
: More... :
: F4=Prompt F12=Cancel F15=Repeat :
: F16=Delete F22=Set Units :
:............................................................................:
Figure 50. Edit Text Mapping panel
48 APU User’s Guide