Filter
Top Products
Mapping a Field to a Second Position
If you want to place the field at a different position, press the PAGE-DOWN key
to re-display the above window. This time, however, the screen will say “Mapping
2/2”:
Keep pressing Enter to exit.
Multiple Mapping Restrictions
The following restrictions apply to the multiple field location mapping function:
1. You can place the same field at four locations only; that is the first location and
three additional locations.
2. You can change the length of the field in the first mapping only. You will not
be allowed to change the field length for additional locations. Thus, you can
only set the units for the first location, but not after that.
3. The F16 (Delete) function will delete all specifications if the first target location
is shown; otherwise it will only delete one target location (2 to 4).
Define Field Mapping
Spooled file . . . . : INVSCS Page/Line......: 1/1
...............................................................................
: Map Text :
: Type choices, press Enter. :
: From Row / Column : 12 / 12 :
: Mapping .....: 1/ 1 :
: Length . . . . . . 22 :
: Position across . . 1.1 *INCH Value :
: Position down . . . 2 *INCH Value :
: Font family.... HELVETICA *PRTDEF, Value F4 for list :
: Point size . . . 12 *CALC, Value :
: Bold . ..... 1 1=Yes :
: Italic ..... 1=Yes :
: Rotation ..... *DEFAULT *DEFAULT, 0, 90, 180, 270 :
: Color . . . . . . . *PRTDEF *PRTDEF, Value F4 for list :
: More... :
: F4=Prompt F12=Cancel :
: F22=Set Units :
:.............................................................................:
Figure 52. Repeat Function of Text Mapping panel
Define Field Mapping
Spooled file . . . . : INVSCS Page/Line......: 1/5
........................................................................
: Edit Text Mapping :
: Type choices, press Enter. :
: From Row / Column : 12 / 12 :
: Mapping .....: 2/ 2 :
: Length . . . . . : 22 :
: :
Figure 53. Mapping a Second Position panel
50 APU User’s Guide