JVC GY-HM700E Camera Accessories User Manual


 
98
Status Screen
These are the status screens displayed in Media mode (IEEE1394 Input mode).
STATUS 1 Screen
STATUS 2 Screen
Status Screen in 1394
Mode
RE
S
[Event/Warning Display Area] (A Page 91 )
* Appears onl
y
when a warnin
g
is displa
y
ed [Volta
g
e/Remainin
g
Batter
y
Power] (A Pa
g
e 98 )
1280x720
24p HQ
282min
A
B
CD
[Event/Warning Display Area] (A Page 91 )
Item Description
A Frame Rate/Bit Rate
Displays the frame rate and bit rate in pairs. (60p HQ, 30p HQ, 60i HQ, 60p SP, 30p SP, 60i SP, 50p HQ, 25p
HQ, 50i HQ, 50p SP, 25p SP, 50i SP, 24p HQ, 24p SP)
B Resolution Display
Displays the video image resolution. (1920ן1080, 1440ן1080, 1280ן720)
C Audio Level Meter
Displays the audio level for CH-1 and CH-2.
When the input sampling frequency is set to a value other than 48K in IEEE1394
mode, a mark is displayed with the frequency. (32k, 44.1k)
The positions of -20 dB and -10 dB are displayed as A
oB.
Memo :
You can turn ON/OFF the display using [Audio Meter] of [Status Display...] in the
[LCD/VF] menu. (A Page 85)
D Voltage/Remaining
Battery Power
Displays the current status of the power supply in use.
Display Description
Currently powered by an AC adapter. The current voltage is shown on the right.
If the supplied voltage from the AC adapter is low, the voltage value will be
displayed in red as a warning.
Currently powered by a battery.
When the battery power runs out, the battery mark appears hollow, and ARESB is
displayed.
Memo :
The display on the right can be set using [Battery Info] of [Status Display...] in the
[LCD/VF] menu. (A Page 85)
-20 dB
-10 dB
12.3V
12.3V
200min
30%
RES