Filter
Top Products
78
Menu Display and Detailed Settings
Detail/Adjust... Item
* Default values are indicated in bold characters.
Camera Process Menu
(continued)
Item Setting Values Function
V/H Balance
H-Max, 4 to1,
Normal,
-1 to -4, H-Min
For setting the H/V balance to enhance contour (detail) in the horizontal (H) or vertical (V)
direction.
Increase the number : Enhances contour in the horizontal direction.
Decrease the number : Enhances contour in the vertical direction.
H Frequency
High
Middle
Low
For specifying the correction frequency of the horizontal contour. Set this according to the object.
High : Emphasizes the high frequency range. Use this when shooting objects with fine
patterns.
Middle : Emphasizes the intermediate frequency range.
Low : Emphasizes the low frequency range. Use this when shooting objects with large
patterns.
V Frequency
High
Low
For specifying the correction frequency of the vertical contour. Set this according to the object.
Low : Emphasizes the low frequency range.
High : Emphasizes the high frequency range.
Memo :
● This item cannot be selected when [Camera Resolution] of [Record Format] in the [Record
Set] menu is set to A1920x1080B or A1440x1080B. (A Page 71)
Skin Detect
On
Off
For turning On/Off the Skin Detail function, which is used to adjust the contour correction effect
of the colors captured by the [Skin Color Adjust...] menu.
On : Enables the Skin Detail function. (Softens the detail at areas where skin tone is
detected.)
Off : Disables the Skin Detail function.
Memo :
● Even if [Skin Detect] is set to AOffB, [Skin Detect] is forcibly set to AOnB when the [SKIN AREA/
SPOT METER] switch is flipped. Alternatively, you can set [Skin Detect] to AOffB, and turn the
Skin Detail function On/Off by flipping the lever whenever necessary.
Level
-3
-2
-1
For setting the level of contour correction (degree of softening) using the Skin Detail function.
This item is selectable only when [Skin Detect] is set to AOnB.
-3 : High level of contour correction (degree of softening)
-2 : Medium level of contour correction (degree of softening)
-1 : Low level of contour correction (degree of softening)
Skin Color
Adjust...
For setting the Skin Detail function. (A Page 102)
Skin Color
Detect
Execute
Stop
For capturing the skin color.
Execute : Captures the color that triggers the Skin Detail function.
Stop : Disables capturing of the color that triggers the Skin Detail function.
Skin Color
Range
Wide, 9 to 1,
Normal,
-1 to -9, Narrow
For adjusting the range of skin tone to trigger the Skin Detail function. Adjust accordingly while
checking the color range visually.
Increase the number : Widens the range.
Decrease the number : Narrows the range.
Memo :
● When [Color Gain] in the [Camera Process] menu is set to AOffB, only the area where Skin
Detail is functioning is displayed in skin tone. (A Page 77)