JVC GY-HM700E Camera Accessories User Manual


 
107
The menu settings of can be stored on the camera recorder
or an SDHC card by saving them as a setup file.
Loading a saved setup file enables you to reproduce the
appropriate setup state speedily.
Two types of setup files are available.
Scene file:
File that contains all menu settings, ranging from video
format settings to image creation settings, such as device
settings and shooting conditions.
Picture file:
File that contains image creation settings in accordance to
the shooting conditions ([Camera Process] menu items).
(A Page 76)
Make use of the [Setup File Manage] menu to save or load a
setup file.
The following operations can be performed on the [Setup File
Manage] menu.
Saving setup files (
A
Page 109)
Loading a setup file (
A
Page 110)
Resetting a saved file (
A
Page 110)
Number of storable setup files
Camera recorder : [CAM1] to [CAM4]
SDHC Card
Slot A : A[EXT1] to A[EXT8]
Slot B : B[EXT1] to B[EXT8]
Preset setup files
As described below, there are three types of scene files and
two types of picture files that can be loaded according to
different shooting conditions.
Scene file
[GY-HD 60p LIKE] : Setting is adjusted according to the
tone of the GY-HD series. [Camera
Resolution] is set to A1280x720B, and
[Frame & Bit Rate] is set to
A60p(HQ)B.
[GY-HD 50p LIKE] : Setting is adjusted according to the
tone of the GY-HD series. [Camera
Resolution] is set to A1280x720B, and
[Frame & Bit Rate] is set to
A50p(HQ)B.
[CINEMA 1080/24p]: Setting that is suited for movie-like
video shooting. [Camera Resolution]
is set to A1920x1080B, and [Frame &
Bit Rate] is set to A24p(HQ)B.
Picture file
[GY-HD LIKE] : Setting is adjusted according to the
tone of the GY-HD series.
[CINEMA] : Setting that is suited for movie-like
video shooting.
Memo :
The above setup files are used exclusively for loading. They
cannot be overwritten or reset.
Configuring Setup Files