Filter
Top Products
46
Shooting
Time code and user’s bit data are recorded with the video in
this camera recorder.
The time code and user’s bit are displayed on the viewfinder
and LCD screens during playback or recording. (Status
screen)
Displaying Time Code and User’s Bit
The time code and user’s bit are displayed on the viewfinder
and LCD screens during playback or recording.
The display differs according to the menu settings.
1 Set [Main Menu]B[LCD/VF]B[Status Display...]B[TC/
UB] to AOnB. (A Page 85)
Time code or user’s bit data is displayed on the status
screen.
2 Select the display with the [TC DISPLAY] switch on
the LCD monitor.
Select time code display (TC) or user’s bit display (UB).
Memo :
●
The built-in time code generator number is displayed.
●
Time code display for [IEEE1394] input is not supported.
●
Values recorded on the SDHC card is displayed in Media
mode.
Time Code Operation Mode
Three types of time code operation can be selected with the
[TC GENE.] switch. They are AFREEB, ARECB, and
AREGENB.
* When [Rec Mode] in the [Record Set] menu is set to
AVariable FrameB, time code operation enters RecRun
mode.
Setting Time Code and
User’s Bit
00:00:00:00
MAX 123%
MIN 45%
SKIN AREA
S.DTL
B -3
ND1/16 A<3200K>
STBY
100min
100min
1280x720
24p HQ
B
A
282min
30/24 fps
Time Code or User’s Bit
STATUS 1 Screen
[TC DISPLAY]
Setting Switch
[TC GENE.] Setting Switch
Setting Display LCD/VF Display
VIDEO Output
Display
TC
Time
Code
When [Main Menu]
B
[LCD/
VF]
B
[Status Display...]
B
[TC/
UB] is set to
A
On
B
, time code
or user’s bit is displayed
during the following status
display and information
display mode of the LCD
screen.
Ⅵ
STATUS 1 Screen in
Camera mode
Ⅵ
STATUS 1, STATUS 2
Screens in Media mode (SD)
When [Analog Out
Char.] or [SDI Out
Char.] in the [A/V
Out] menu is set to
A
On
B
, time code or
user’s bit is
displayed in the
respective video
output images
during the LCD/VF
display setting on
the left.
UB
User’s Bit
Setting Mode Description
FREE FreeRun
mode
The time code operates in the run mode at
all times regardless of the recording status.
It continues to run even when the power of
the camera recorder is turned off. *
REC RecRun
mode
The time code operates in the run mode
during recording. It continues to run in the
order of the recorded clips as long as the
SDHC card is not replaced. If the SDHC
card is removed and recording is made on
another card, time code will be recorded on
the new card from where it was left off in the
previous card.
REGEN Regen
mode
The time code operates in the run mode
during recording. When the SDHC card is
replaced, the last time code recorded on the
card is read and recorded on a new card so
that the time code continues in running
order. (A Page 49)