Filter
Top Products
26
Preparations
Changing the Display Style
You can change the display style of the date/time on the
menu.
Memo :
●
To perform the settings while looking at the monitor screen
connected to the video signal output terminal, set [Analog
Out Char.] or [SDI Out Char.] in the [A/V Out] menu to
A
On
B
.
(
A
Page 86)
Ⅵ Setting the date style (Date Style) (A Page 85)
A
Select [LCD/VF]B[Status Display...]B[Date/Time].
B Select the date display style.
[Setting values: YMD (year, month, day), MDY (month,
day, year), DMY (day, month, year)]
C Press the Set button.
Ⅵ Setting the time style (Time Style) (A Page 85)
A
Select [LCD/VF]B[Status Display...]B[Time Style].
B Select the time display style.
[Setting values: 12hour (12 hour display), 24hour (24 hour
display)]
C Press the Set button.
Date/Time Display in Different Operation
Modes
The monitor speaker can be rotated 180 degrees.
Adjust according to the position of your ear.
Memo :
● Adjust the volume of the monitor speaker with the
[MONITOR] level adjustment knob at the side control panel
on the right of the camera recorder. Various warning alarm
tones may also be output repeatedly. (A Page 120)
Note :
●
The rotation angle of the monitor speaker is 180 degrees.
Do not over-rotate the monitor speaker.
Setting the Clock (Initial
Setting) (continued)
During Camera Mode Date/time of the built-in clock is
displayed.
During Media Mode
(SD Card Mode)
Shooting date/time of the clip being
played back is displayed.
During Media Mode
(IEEE1394 Mode)
Date/time is not displayed.
Adjusting the Monitor
Speaker
Monitor
Speaker
180 Degrees Rotation
[MONITOR] Level Adjustment Knob