Filter
Top Products
25
(
Set the date/time of the built-in clock in the [Initial Setting]
screen. The configured date/time data is saved in the built-in
rechargeable battery even if the power is turned off.
Setting the Clock in the [Initial Setting]
Screen
The [Initial Setting] screen appears when the power is turned
on for the first time and when the built-in battery is turned on
again after being fully discharged.
All operations are disabled until initial settings are complete.
1 Set the [POWER] switch to AONB.
The [Initial Setting] screen appears.
Ⅵ For GY-HM700CHU/GY-HM700U
Ⅵ For GY-HM700CHE/GY-HM700E
2 Specify [Time Zone] and [Date/Time].
A Move the cursor with the cross-shaped button (HI) and
select the setting item.
B Change the values with the cross-shaped button (JK).
3 Press the Set button after setting is complete.
The clock is set to 0 seconds of the input date/time.
Memo :
●
The configured date/time data can be displayed on the LCD
monitor and viewfinder and be recorded to the SDHC card.
●
The value of the year that can be set ranges from
A
2000
B
to
A
2099
B
.
Changing the Time after Initial Setting
Ⅵ Setting the date/time (A Page 88)
1 Select [Others]B[Date/Time].
The [Date/Time] setting screen appears.
2 Set the date and time.
A Move the cursor with the cross-shaped button (HI) and
select the setting item.
B Change the values with the cross-shaped button (JK).
3 Press the Set button after setting is complete.
The clock is set to 0 seconds of the input date/time.
Setting the Clock (Initial
Setting)
[MENU] Button
Cross-Shaped
Button,
Set Button
[POWER] Switch