Filter
Top Products
28
Preparations
Adjusting the LCD Monitor
You can change the angle and brightness of the LCD monitor
screen according to your usage condition.
Changing the brightness of the screen will not affect the
recorded images.
ⅥAdjusting the Angle of the LCD Monitor
1 Slide the LCD lock release knob to open the LCD
monitor.
2 Rotate the LCD monitor to adjust the angle.
●
While the LCD monitor is open, you can rotate it 180
degrees upward or 90 degrees downward.
●
Rotating the LCD monitor 180 degrees upward enables you
to see the screen from the lens side.
Select [Main Menu]
B
[LCD/VF]
B
Set [LCD Mirror Mode] to
A
Mirror
B
B
Set button (
A
Page 82)
ⅥAdjusting the LCD Monitor Screen
Adjusting contour and brightness
●
Use the [LCD BRIGHT +/-] button to adjust the brightness of
the LCD monitor screen. Press the [+] and [-] buttons
simultaneously to return to standard settings.
●
During adjustment, the brightness level is displayed on the
LCD monitor screen.
● During Camera mode, SD Card mode (playback), or
IEEE1394 mode
● During SD Card mode (thumbnail), menu operation, or
USB mode
●
Use the [LCD PEAKING +/-] button to adjust the contour of
the LCD monitor screen. Press the [+] and [-] buttons
simultaneously to return to standard settings.
●
During adjustment, the contour level is displayed on the LCD
monitor screen. (
A
Page 28 [Adjusting contour and
brightness])
● During Camera mode, SD Card mode (playback), or
IEEE1394 mode
● During SD Card mode (thumbnail), menu operation, or
USB mode
Adjusting the Viewfinder
You can change the brightness and peaking of the viewfinder
screen according to your usage conditions.
Changing the brightness of the screen will not affect the
recorded images.
Note :
● A high-definition viewfinder is used on this camera
recorder in order to provide an accurate focusing
environment. Due to the characteristic of the display
device, colors may appear on the images when you blink
your eyes. This is not a malfunction. It does not affect the
recorded images, SDI output, or component output.
Adjusting the LCD Monitor
and Viewfinder
[+] : Press this button to brighten the screen.
[-] : Press this button to darken the screen.
1
2
LCD Lock Release Knob
Tilt 90 degrees
downward
Tilt 180 degrees
upward
[LCD PEAKING +/-] Button
[LCD BRIGHT +/-] Button
[+] : Press the button to increase contour correction.
[-] : Press the button to decrease contour correction.
Slide Lock Ring
[VF PEAKING] Knob
[VF BRIGHT] Knob
Eyepiece
Eyepiece
Lock Ring
Eyepiece Focus Ring