JVC GY-HM700E Camera Accessories User Manual


 
119
Tally Lamps
The tally lamps start blinking when the remaining space on the SDHC card is running out during recording, or when the battery
power is running low. )
Alarm Sound
Alarm sound is output from the monitor speaker and [PHONES] terminal when the battery level is low.
Alarm sound is output from the monitor speaker and [PHONES] terminal when the remaining space on the SDHC card is low.
(Camera mode only)
Alarm sound is also output when an error occurs in the camera recorder.
Memo :
[Alarm Level] in the [Others...] menu can be used to specify whether alarm sound is to be output, as well as the volume level.
(A Page 87)
Error Display
Status Action
Status Screen
Menu/Thumbnail
Screen
EXT-RECORDER
POWER ?
^ Power of the camera recorder is
turned off while the external device
connection is detected, and the same
connection cannot be detected
several seconds after power is turned
on again. (Error displays for about 7
seconds)
When making use of a connected external
device, turn on the power supply on the
connected device.
VIDEO FORMAT
INCORRECT
^ Video format of the file for Clip
Review is different from the [Frame
& Bit Rate] setting of the camera
recorder.
IEEE1394 input video format is
different from the [Camera
Resolution] and [Frame & Bit Rate]
settings.
Set [Camera Resolution] and [Frame & Bit
Rate] correctly. (A Page 71)
[HD/DV] terminal mode switch is
not correctly set for IEEE1394 input
signals.
Set the [HD/DV] terminal mode switch
according to the IEEE1394 input signals
correctly.
MEDIA FULL ^ [REC] button is pressed when the
media in use has no remaining
space.
Remaining space ran out during
recording.
Replace the SDHC card with a new one.
FAN MAINTENANCE
REQUIRED
^ Usage time of the fan has
exceeded 9000 hours.
Check the fan and replace accordingly. For
more details, consult your nearest JVC
dealer.
Memo :
You can check the usage time of the fan at
[Others...]B[System Information]B[Fan
Hour]. (A Page 88)
Blinking Mode Remaining Battery Power/SDHC Card Space
Blinks slowly
(Once every second)
Battery power is low
Remaining recording time on SDHC card is less than 3 minutes
Blinks quickly
(4 times a second)
SDHC card is full
Error on the camera recorder