Filter
Top Products
57
Playback
To play back clips recorded on SDHC cards, switch to the
Media mode (SD Card mode).
Press the [CAM/MEDIA] selection button in Camera mode to
enter SD Card mode. A thumbnail screen of the clips
recorded on the SDHC card is displayed.
You can play back the selected clip on the thumbnail screen.
Memo :
●
When an SDHC card without any clips is inserted,
A
No
Clips
B
is displayed.
Operation Buttons
Use the operation buttons on the side control panel of the
camera recorder to operate the thumbnail screen.
Thumbnail Screen
The thumbnail screen is available in “No Detailed Properties
(4x3 thumbnails)” and “Detailed Properties (4x1 thumbnails)”
displays.
Use the thumbnail menu [Detailed Properties] to switch
display. (A Page 61)
The first frame of the recorded clip on the SDHC card is
displayed as the thumbnail.
Thumbnails are displayed in order of recording from the
oldest to most recent.
Ⅵ
No Detailed Properties (4x3 Thumbnails)
Screen
Playing Back Recorded
Clips
Name Description
A [MENU] Button
Displays the thumbnail screen menu.
Press this button to close the menu
screen during menu display and return
to the normal screen.
B [USER1] Button
Appends (or deletes) an OK mark on
the selected clip.
C [USER2] Button
Deletes the selected clip.
D Set (Play) Button
Sets the values and items. (Confirm)
Plays back the selected clip.
E Cross-Shaped
Button (JKHI)
J : Moves the cursor upward.
K : Moves the cursor downward.
H : Moves back to the previous item.
I : Moves forward to the next item.
(To enter sub-menus or display
pop-up menus.)
F [CANCEL] (Stop)
Button
Cancels settings and returns to the
previous screen.
Stops video playback.
A
D
E
F
B
C
Name Description
A Cursor
Indicates the selected clip. Use the cross-
shaped button (JKHI) to move the cursor.
After power is turned on and SDHC card is
inserted, or when the camera recorder is
switched to Media mode (SD Card mode),
the cursor is positioned on top of the latest
clip.
When the camera recorder changes to the
thumbnail screen during playback, the cursor
is positioned on the clip that was played
back. If you play back the same clip again, it
will continue from where it was left off.
The default position of the cursor when
SDHC card slot is switched is on the
previously selected clip before the switch.
Ⅵ
Example of the moving order of the cursor
(total 22 clips)
B
F
D
G
H
J
A
C
E
I
Scrolls
page