Filter
Top Products
Playing a Video with Defective Management Information
The management information of a video may be damaged if recording is not
performed
correctly, such as turning off the power in the middle of recording.
You can perform the following operations to play back the videos with
defective management information.
1
Open the LCD monitor.
.
0
Check if the recording mode is A.
0
If
the mode is B still image, tap B on the recording screen to display
the mode switching screen.
Tap A to switch the mode to video. (You can also use the A/B button
on this unit.)
2
Tap “<<PLAY” to select the playback mode.
.
PLAY
REC
MENU
3
Tap “MENU”.
.
REC
MENU
4
Tap “PLAYBACK OTHER FILE”.
.
PLAYBACK OTHER FILE
VIDEO
5
Tap on the file to start playback.
.
MENU
REC
“Playing Back Videos” (A p. 113)
Memo :
0
An MTS file is created in the EXTMOV folder when management
information is corrupted.
0
Depending on the condition of the damaged file, playback might fail or
may not run smoothly.
Playing Back Still Images
You
can select and play back the recorded still images from an index screen
(thumbnail display).
1
Open the LCD monitor.
.
0
Check if the recording mode is B.
0
If the mode is A
video, tap A on the recording screen to display the
mode switching screen.
Tap B to switch the mode to still image. (You can also use the A/B
button on this unit.)
2
Tap “<<PLAY” to select the playback mode.
.
MENU
MENU
PLAY
3
Tap on the file to start playback.
.
MENU
REC
0
Tap I/J to select the media for playback and change the index
screen (thumbnail display). (GZ-EX250)
0
Tap u to return to the index screen.
Playback
116