JVC GZ-EX210 Camcorder User Manual


 
Record and Send Videos via E-mail (VIDEO
MAIL ATTN.)
Videos of up to 15 seconds can be recorded and sent via e-mail.
With
this function, short videos can be delivered easily even on a daily basis,
such as to show the growing up of small children to their distant
grandparents.
.
Memo :
0
Specifications of the videos sent via video mail are as follows:
System: MP4
Video:
- H.264/MPEG-4 AVC baseline profile codec
- 640 x 360 resolution
- 30p frame rate
- 1 Mbps bit rate
Audio:
- Advanced Audio Coding (AAC) system
- 48 kHz sampling rate
- 16 bit
- 2 channels
Caution :
0
Be careful not to cause too much sending of e-mails. Depending on the
internet provider that provides the e-mail service, the e-mails may be
marked as spam or the usage limited may be exceeded.
Be sure to check the terms of the internet provider in advance to find out
if there are any restrictions on the number or size of e-mails that can be
sent.
0
When setting another person as the recipient, be sure to obtain his/her
consent in advance.
0
Depending on the e-mail service provider, the sending of video mail may
not be supported.
0
Too
much usage may cause high communication fees to be incurred, and
there may be a limit to the volume of communication. For more details,
please check your Internet or smartphone subscription.
0
JVC will not be responsible for any trouble that occurs upon the sending
of mails.
0
Videos captured via video mail are not saved to the camera or SD card.
0
Videos that have already been captured cannot be sent.
What You Need
0
Wireless LAN router (use a product that has a Wi-Fi certification logo)
0
Internet connection
0
Account
for sending e-mails (Supports SMTP. E-mail services that is only
accessible from the web cannot be used.)
Necessary Settings
To send e-mails, the following settings are required.
*The
above settings are not necessary if they have already been set for other
functions.
0
Registering an access point
“Registering the Access Points to Connect (“ACCESS POINTS”)”
(A p. 35)
0
Setting the account for sending e-mails
“Setting the Sender’s E-mail Address” (A p. 30)
0
Registering the recipient’s e-mail address
“Registering the Recipient’s E-mail Address” (A p. 33)
o
Selecting the Recipient’s E-mail Address
1
Tap “MENU”.
(Operation on this camera)
.
REC
PLAY
MENU
0
The shortcut menu appears.
2
Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
MENU
3
Tap “VIDEO MAIL ATTN.”.
(Operation on this camera)
.
VIDEO MAIL ATTN.
Wi-Fi
4
Tap the e-mail address to be set as recipient.
(Operation on this camera)
.
SET
VIDEO MAIL ATTN.
0
An icon a appears beside the recipient’s e-mail address.
0
After setting, tap “SET”.
0
Settings will not be saved until “SET” is tapped.
Using Wi-Fi
25