Filter
Top Products
38 EN
TAPE DUBBING
Tape Dubbing
1
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 34 and 35.
2
Set the camcorder’s Power Switch to “ ” while
pressing down the Lock Button located on the switch,
turn on the VCR’s power, and insert the appropriate
cassettes in the camcorder and the VCR.
3
Engage the VCR’s AUX and Record-Pause modes.
4
Engage the camcorder’s Play mode to find a spot just
before the edit-in point. Once it is reached, press
4
/6 on the camcorder.
5
Press
4
/6 on the camcorder and engage the VCR’s
Record mode.
6
Engage the VCR’s Record-Pause mode and press
4
/6 on the camcorder.
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set “DISPLAY” to “ON” or “OFF” in the Menu
Screen (੬ pg. 32).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen (੬
pg. 32).
•Playback Sound Mode and Tape Speed Displays
.... set “INDICATION” to “ON” or “OFF” in the Menu
Screen (੬ pg. 32).
•Playback Sound Mode, Tape Speed and Tape Running
Displays
.... set the Power Switch to “ ” or “5S”. Press MENU/
BRIGHT and set “ON SCREEN” to “ON” or “OFF” in
the Menu Screen (੬ pg. 20). Then, set the Power
Switch back to “ ”. Or, press DISPLAY on the
RM-V716U remote control.
VCR (Recording deck)
Connector
cover**
TV
To AV
To S-VIDEO
To AUDIO, VIDEO*
and
-IN
connectors
S-Video cable
(provided)
* Connect when an S-Video cable is not used.
** When connecting the cables, open this
cover.
Core filter
Core filter
“Y/C”/“CVBS”
video out
select switch
If your VCR has the
SCART connector,
use the provided
cable adapter.
Audio/Video cable
[mini-plug to RCA plug]
(provided)
NOTES:
●
When using the cables, make sure you connect the end of the cable with the core filter to the camcorder.
The core filter reduces interference.
●
You can use Playback Zoom (
੬
pg. 42) or Playback Special Effects (
੬
pg. 43) in step 5.
●
Set the video out select switch of the cable adapter as required:
Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.