JVC GR-DVL9200 Camcorder User Manual


 
EN61
Warning Indications
Function
Displays the battery remaining power.
Remaining power level: high
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator blinks.
When the battery power is exhausted, power turns off automatically.
Appears when no tape is loaded, or when the erase protection tab is set to
“SAVE”. ( pg. 9)
Appears if dirt is detected on the heads during recording. Use an optional cleaning
cassette. ( pg. 63)
Appears if condensation occurs. When this indication is displayed, the camcorder turns
off automatically. Wait more than 1 hour until condensation disappears.
Appears for 10 seconds after power is turned on if there is no tape loaded.
Appears when the tape ends during recording or playback. ( pg. 13)
Appears when the date/time is not set. ( pg. 8)
Appears when the clock (lithium) battery is discharged and the previously
set date/time is erased. ( pg. 8)
Appears when Audio Dubbing is unavailable. ( pg. 50)
The error indications (E01 — E06) show what type of malfunction has occured. When
an error indication appears, the camcorder turns off automatically. Remove the power
supply (battery, etc.) and wait a few minutes for the indication to clear. When it does,
you can resume using the camcorder. If the indication remains, consult your nearest
JVC dealer.
LCD Monitor/Viewfinder Indications During Playback
No. Function
1 Displays the sound mode. ( pg. 33)
2 Displays the tape speed.
3 Appears while a tape is running.
4
: Playback
3
: Fast-Forward/Shuttle search
2
: Rewind/Shuttle search
6 : Pause
6
4
: Forward slow-motion
1
6 : Reverse slow-motion
e : Audio Dubbing
6e : Audio Dubbing Pause
4 Displays the date/time. ( pg. 33)
5 Displays the time code. ( pg. 33)
6 BRIGHT :
Displays the brightness of the LCD
monitor or the viewfinder.
( pg. 12)
VOLUME: Displays the speaker or headphone
volume. ( pg. 31)
The level indicator moves.
1
L
V
2
4
O
T
B
L
C
I
U
T
M
1
/
E
0
S
:
O
0
U
6
N
:
D
2
1
+
0
31
L
.
P
1
1
2
6
.
:
4
0
4
0
0
5
1 2 3
46
Indikator
CONDENSATION
OPERATION PAUSED
PLEASE WAIT
TAPE!
TAPE END
SET DATE/TIME!
ERROR!
REFER MANUAL
E01 — E06
UNIT IN SAFEGUARD
MODE REMOVE AND
REATTACH BATTERY