JVC GR-DVL9200 Camcorder User Manual


 
EN45
MAKE CONNECTIONS
Also refer to pg. 34 and 35.
1
To connect to:
A JVC VCR equipped with a remote pause
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A JVC VCR not equipped with a remote
pause connector but equipped with an R.A.
EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the RM-V716U’s
PAUSE IN connector.
2
Insert a recorded tape into the camcorder and set the
Power Switch to “ ” while pressing down the
Lock Button located on the switch.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR’s instructions).
NOTES:
Before Random Assemble Editing, make sure the indications
do not appear on the TV monitor. If they do, they will be
recorded onto the new tape.
To choose whether or not the following displays appear on
the connected TV . . .
•Date/Time
.....set “DISPLAY” to “ON” or “OFF” in the Menu Screen
( pg. 32).
•Time Code
.....set “TIME CODE” to “ON” or “OFF” in the Menu
Screen (
pg. 32).
•Playback Sound Mode and Tape Speed Displays
.....set “INDICATION” to “ON” or “OFF” in the Menu
Screen ( pg. 32).
•Playback Sound Mode, Tape Speed and Tape Running
Displays
.....set the Power Switch to “ ” or “5S”. Press MENU/
BRIGHT and set “ON SCREEN” to “ON” or “OFF” in
the Menu Screen ( pg. 20). Then, set the Power
Switch back to “ ”. Or, press DISPLAY on the
RM-V716U remote control.
When using the cables, make sure you connect the end of
the cable with the core filter to the camcorder. The core
filter reduces interference.
Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts Y/
C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video cable.
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected instead
of an S-Video cable and audio/video cable.
DISPLAY
To Remote
PAUSE or
R.A.EDIT
RM-V716U
(provided)
VCR
TV
To AUDIO, VIDEO*
and
-IN
connectors
“Y/C”/“CVBS”
video out
select switch
To PAUSE IN
Editing cable
(provided)
S-Video cable
(provided)
* Connect when an S-Video cable is not used.
** When connecting cables, open this cover.
Connector
cover**
To AV
To JLIP
(EDIT)
To
S-VIDEO
Core filter
Core filter
If your VCR has the
SCART connector,
use the provided
cable adapter.
CONTINUED ON NEXT PAGE
Audio/Video cable
[mini-plug to RCA plug]
(provided)
ATTENTION FOR EDITING CABLE
•Be careful not to mistake it for the JLIP
cable ( pg. 4).
•Make sure you connect the end with the
core filter to the camcorder.