Filter
Top Products
EN5
How To Attach Core Filters
Attach the provided Core Filters to optional DV cable, external microphone or headphones.
Core Filters reduce interference.
Ⅲ When connecting cables, attach the end with the Core Filter to the camcorder.
3 cm
Stopper
Release the stoppers on both ends of the Core Filter.
Run the cable through the Core Filter, leaving approx 3 cm of cable
between the cable plug and the Core Filter. Wind the cable around
the outside of the Core Filter as shown in the illustration.
•Wind the cable so that it is not slack.
NOTE:
Take care not to damage the cable.
Close the Core Filter until it clicks shut.
External microphone and headphones: Wind once.
DV cable: Wind twice.
2
3
1