JVC GR-DVL9200 Camcorder User Manual


 
EN55
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
30.
•In places subject to low
temperature, images become
dark due to the characteristics
of the LCD monitor. When this
happens, the displayed colours
differ from those that are
actually recorded. This is not a
defect of the camcorder.
•When the LCD monitor's
fluorescent light reaches the
end of its service life, images
on the LCD monitor become
dark. Consult your nearest JVC
dealer.
31.
•The light used to illuminate the
LCD monitor causes it to
become hot.
32.
•This may occur when the
surface or the edge of the LCD
monitor is pressed.
33.
•Certain Fade/Wipe effects,
certain modes of Programme
AE with special effects, “DIS”
and other functions that cannot
be used together are selected
at the same time.
34.
•The LCD monitor and the
viewfinder are made with
high-precision technology.
However, black spots or bright
spots of light (red, green or
blue) may appear constantly
on the LCD monitor or the
viewfinder. These spots are not
recorded on the tape. This is
not due to any defect of the
unit. (Effective dots: more than
99.99 %)
35.
•The optional headphones are
not connected to the
headphones connector.
•The sound volume of the
headphones connector was not
adjusted appropriately. The
sound volume at this point is
the same as the level it was
adjusted to during playback.
36.
•The Power Switch is not set to
”.
37.
Your TV has AV input
terminals, but is not set to its
VIDEO mode.
•The cassette holder cover is
open.
30.
•Adjust the brightness and
angle of the LCD monitor
( pg. 12, 13).
31.
•Close the LCD monitor to turn
it off or set the Power Switch
to “OFF”, and let the unit cool
down.
32.
————
33.
•Re-read the sections covering
Fade/Wipe effects,
Programme AE with special
effects and “DIS” ( pg. 19,
25, 26).
34.
————
35.
•Connect the optional
headphones to the head-
phones connector
( pg. 50, 58).
•Adjust the sound volume
during playback ( pg. 31).
36.
•Set the Power Switch to
” ( pg. 31).
37.
•Set the TV to the mode or
channel appropriate for video
playback ( pg. 34, 35).
•Close the cassette holder
cover ( pg. 9).
30.
Images on the LCD monitor
appear dark or whitish.
31.
The rear of the LCD monitor
is hot.
32.
The indicators and the image
colour on the LCD monitor
are not clear.
33.
The LCD monitor or
viewfinder indications blink.
34.
Coloured bright spots appear
all over the LCD monitor or
the viewfinder.
35.
During recording, sound
cannot be heard.
36.
Play, Rewind and Fast-
Forward functions do not
work.
37.
The tape is moving, but
there is no picture.
CONTINUED ON NEXT PAGE