JVC GR-DVL9200 Camcorder User Manual


 
EN53
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
15.
Digital Zoom does not work.
16.
Programme AE with special
effects and Fade/Wipe Effects
do not work.
17.
The Black & White Fader
does not work.
18.
The Dissolve function does
not work.
19.
The Picture Wipe and
Dissolve functions do not
work.
20.
The picture wipe function
does not work.
15.
•10X optical zoom is selected.
•“P.AE/EFFECT” is set to
“VIDEO ECHO” in the Menu
Screen.
•Multi-Analyser 4 or Multi-
Analyser 9 was attempted
during Digital Zoom.
•Picture Wipe or Dissolve are
being used in a scene
transition.
•Dissolve during 5-Second
recording is performed.
16.
•The Power Switch is set to
” or “5S”.
17.
•The Sepia or Monotone mode
is activated.
18.
•The Sepia, Monotone or Slow
Shutter mode of Programme
AE with special effects is
activated.
•“WIDE MODE” is set to
“SQUEEZE” in the Menu
Screen.
•The previously selected mode
of Programme AE with special
effects was changed after the
last selected scene for editing
was registered.
19.
•The last selected editing scene
is ending.
•At the end of the last selected
scene for editing, the Power
Switch was set to “OFF”.
•The power is off.
20.
•The Slow Shutter mode is
activated.
•“WIDE MODE” is not set to
“OFF”.
15.
•Set “ZOOM” to “40X” or
“100X” in the Menu Screen
( pg. 19).
•Disengage the “VIDEO
ECHO” mode ( pg. 25).
•Disengage Multi-Analyser 4
or Multi-Analyser 9
( pg. 17).
•Wait until the Picture Wipe or
Dissolve effects are completed
( pg. 26, 27).
•Change the setting of either
the Menu Screen or the Power
Switch ( pg. 24).
16.
•Set the Power Switch to “
( pg. 25, 26).
17.
•Turn off Sepia and Monotone
( pg. 25).
18.
•Turn off Sepia, Monotone or
Slow Shutter before adding
Dissolve to a scene transition
( pg. 25, 26).
•Set “WIDE MODE” to
“CINEMA” or “OFF” mode
( pg. 19).
•Make sure you have selected
the mode of Programme AE
with special effects you want
before starting editing
( pg. 25, 26).
19.
•Select Picture Wipe or
Dissolve before beginning
recording. The effects are then
automatically activated
( pg. 26).
•Do not turn off the
camcorder’s power after
setting Edit-In and Edit-Out
points, as they will all be
erased ( pg. 26).
•The camcorder automatically
shuts off after 5 minutes have
elapsed in the Record-
Standby mode. Make sure you
continue operations within 5
minutes after engaging
Record-Standby mode
( pg. 26).
20.
•Disengage the Slow Shutter
mode or set “WIDE MODE”
to “OFF” before preparing to
use the Picture Wipe
( pg. 19, 25).
CONTINUED ON NEXT PAGE