Filter
Top Products
E25
Set to output either semi-animation (7.5 frame/sec.) of 640 × 480 pixels or full-motion video (30
frames/sec.) of 640 × 240 pixels to the VGA monitor.
Set MONITOR in the SYSTEM SETTING screen.
(੬ Page 59)
FINE: Semi-animation (update rate 7.5 frames/sec.) of
640 × 480 pixels
DRAFT: Full-motion video (update rate 30 frames/sec. of
640 × 240 pixels
(Default setting: FINE)
VGA mode settings
Lens settings
Set according to whether the used lens to be used is an auto-iris lens or a manual lens.
Set the IRIS MODE on the EXPOSURE screen.
(੬ Page 50)
AUTO: Set when using an auto-iris lens
MANUAL: Set when using a manual lens, using an auto-
iris lens in MANUAL or no lens.
(Default setting: AUTO)
Menu settings
The settings for the VGA mode and lens are made on the menu screen.
The menu screen is outputted through the VGA monitor.
--- ---EXPOSURE
IRIS M
O
DE : AU
TO
:NORM
1
AL
00
:FULL
:STEP
:1/8s
P:STE
:ISO
400:ISO
:----
IRIS LEVEL
:0
AE LEVEL
IRIS DETECT
ITY
IRIS AREA
SHUTTER
SPEED
LEVEL
SENS IT IV
ALC MAX
--- ETTING ---SYSTEM S
ON SCREEN
FRZ DISPLAY
ITY
:
:
O
N
:FINE
DISK
MEMORY NUM
:0.7V
:OFF
RCLEA ..
..
:
PRIOR
MON I T
:NARROW
AREA
OR
MOR
Y
BAR LEVEL
NEGA
MENU RE
ITMEADJUST
S
VIDEO ME
ET
..
:OFF
SYNC ON G
MEMO
• This menu item will be displayed with ------------ when set to the SXGA mode by the rear dip switches,
disabling changes.
• Setting the shutter speed slower than the time interval (update rate) for screen output will slow the
update rate according to the shutter speed.