Filter
Top Products
E43
It is possible to change the video signal which is output from the camera via MONITOR terminal
from positive to negative video.
1.
Press the MODE button to enter the REC mode (REC
lamp on), then press the MENU button for at least 2
seconds to display the REC MENU screen.
2.
Use the UP or DOWN button to select 5. SYSTEM SET-
TING (displayed in purple when selected), then press
the SET button.
The SYSTEM SETTING screen will appear.
3.
Press the UP or DOWN button to select NEGA (NEGA
will be displayed in purple when selected), then press
the SET button.
The set value will be displayed in purple, indicating that
it can be changed.
4.
Press the UP or DOWN button to set the value to ON.
The outputted image will be the negative image.
5.
Pressing the SET button will register the setting to the
memory.
6.
Press the MENU button twice to return to the normal
screen.
Outputting negative images
SEE INSTRUCTION MANUAL
POWER
DC IN
REMOTE
MONITOR
LENS
FREEZE
PLAY
SETDOWN
AW/SELSEND
SCSI
UPMENU
MODE
REC
ON 1 2 3 4
UP
DOWN
MODE/SET
REC lamp
MENU
--- ETTING ---SYSTEM S
ON SCREEN
FRZ DISPLAY
ITY
:
:
:
MEMORY NUM
:0.7V
:ON
RCLEA ..
:
PRIOR
MON I T
:NARROW
AREA
OR
:OFF
SYNC GON
MOR
Y
BAR LEVEL
NEGA
MENU RE
ITMEADJUST
S
VIDEO ME
ET
..
ON
FINE
DISK
REC MENU screen
SYSTEM SETTING screen
Set value
Menu item
MONITOR terminal
Pressing the MENU button without pressing the SET button
will return the unit to its previous settings without confirm-
ing the changes.
MEMO
REC--- MENU---
1:EXPOSURE. .
2:WHITE BALANCE..
3:FREEZE..
4:PROCESS. .
5:SYSTEM SETTING. .