Filter
Top Products
E26
1.
Press the MODE button to enter the REC mode (REC
lamp on), then press and hold the MENU button for at
least 2 seconds to display the REC MENU screen.
( ੬ page 10 MODE button)
MEMO
• When the power is turned on, the mode will be the REC
mode.
• If the button is pressed for less than 2 seconds, the REC
MENU (QUICK) screen will appear. ( ੬ Page 49)
• To switch from the PLAY mode to the REC mode, press the
MODE button to light up the REC lamp.
2.
Press the UP or DOWN button to select 5. SYSTEM
SETTING, then press the SET button. The SYSTEM
SETTING screen will appear.
3.
Press the UP or DOWN button to select TIME ADJUST.
Next, press the SET button to display the TIME AD-
JUST screen.
Time and date settings
3. Settings and adjustments for recording (continued)
SEE INSTRUCTION MANUAL
POWER
DC IN
REMOTE
MONITOR
LENS
FREEZE
PLAY
SETDOWN
AW/SELSEND
SCSI
UPMENU
MODE
REC
ON 1 2 3 4
UP
DOWN
MODE/SET
REC lamp
MENU
REC MENU screen
REC--- MENU ---
1:EXPOSURE
Purple
..
2 :WHITE BALANCE. .
3:FREEZE..
4 : PROCESS . .
5:SYSTEM SETTING. .
--- ETTING ---SYSTEM S
ON SCREEN
FRZ DISPLAY
ITY
:
:
ON
:FINE
DISK
MEMORY NUM
:0.7V
:OFF
RCLEA ..
:
PRIOR
MON I TOR
:OFF
SYNC GON
:NARROW
AREA
MOR
Y
BAR LEVEL
NEGA
MENU RE
ITMEADJUST
S
VIDEO ME
ET
..
Purple
MEMO
When selected, item display will become purple.
MEMO
The TIME ADJUST screen can also be displayed by selecting
TIME ADJUST in the SYSTEM SETTING screen of the PLAY/
FREEZE MENU screen.
MEMO
When selected, the TIME ADJUST display will become purple.