Filter
Top Products
E37
Returning to the REC mode
To return to the REC mode after displaying captured im-
ages, press the MODE button to light up the REC lamp.
SEE INSTRUCTION MANUAL
POWER
DC IN
REMOTE
MONITOR
LENS
FREEZE
PLAY
SETDOWN
AW/SELSEND
SCSI
UPMENU
MODE
REC
ON 1 2 3 4
MODE
REC lamp
2.
Pressing the SEL button will switch in sequence from
latest image to the previously Stored images.
3.
Images can also be output from memory to an MO/Zip
®
drive or printer.
( ੬
page 38 Saving images from the memory to an MO/Zip
®
disk )
( ੬ page 39 Outputting images from the memory to a printer
)
• It is not possible to enter the PLAY mode directly from the
FREEZE mode. First cancel the freeze before entering the
PLAY mode.
• The character display contents of the monitor screen can
be changed by selecting ON SCREEN in the SYSTEM SET-
TING screen. ( ੬ Page 59)
Playing back images from the memory
It is possible to play back images stored in the camera’s memory. When in the VGA mode,
images will be displayed in 640 × 480 pixels, regardless of whether in the FINE or DRAFT mode.
1.
Press the MODE button to enter the PLAY mode.
The PLAY lamp will light and the latest image stored
will be displayed on the monitor.
( ੬ page 10 MODE button)
● At this time, the memory image no. will be displayed
at the lower right corner of the screen.
MEMO
SEE INSTRUCTION MANUAL
POWER
DC IN
REMOTE
MONITOR
LENS
FREEZE
PLAY
SETDOWN
AW/SELSEND
SCSI
UPMENU
MODE
REC
ON 1 2 3 4
SEL
MODE
PLAY lamp