Filter
Top Products
12
Getting Started
Camera
A
Camera securing hole (4 locations)
This hole is used for mounting the camera on the wall.
B Cable connecting hole, cap
Remove the cap and pull out the cables from this
hole for connection.
(A Page 17)
C Fall Prevention Wire
Connects the camera to the wall. Secure the
camera tightly to the anchor bolts used to mount
the fall prevention wire on the wall.
(A Page 18)
D AC24V Power Cable
Connects the camera to AC24V power. (
A
Page 20)
E Alarm Input/Alarm Output Cable (x8)
This cable is for alarm input and alarm output.
(A Page 22)
F LAN Cable
This connects the unit to the network.
(A Page 22)
G Dome Cover
The dome cover is a delicate object. Handle it
with care.
Note：
●
It is covered with a protective sheet during
shipment. Do not remove this sheet until
installation is complete.
H Dome Cover Fixing Screws (x4)
Name and Function of Parts
Ⅵ Front side
A
H
B
C
D
E
G
A
F
Cable color Signal Name
Brown Input 1
Red Input 1 (COM)
Orange Input 2
Yellow Input 2 (COM)
Green Output 1
Blue Output 1 (COM)
Purple Output 2
Gray Output 2 (COM)
VN-V686WPU_EN.book Page 12 Friday, February 8, 2008 5:20 PM