Filter
Top Products
44
Setting Using Internet Explorer
Encoding Page
This page is for setting JPEG and MPEG4 encoding parameters.
This page can be used during access using AadminB or AoperatorB.
●
Press the [OK] button to enable the new settings.
●
If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry
will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
●
When settings on this page are altered during playback using Built-in viewer, reboot the viewer.
●
There is a maximum limit to the bit rate for transmission by VN-V686WPU. If a bit rate that exceeds the
maximum limit is specified, this new setting will not be applied. For details on the maximum transmission
limit, refer to [Network Requirements] (
A
Page 24).
Setting (continued)
A
B
CDEFG
A Frame Size For setting the frame size of each JPEG or MPEG4 screen to AVGAB (640 x
480) or AQVGAB (320 x 240).
Select one of the four different patterns.
VN-V686WPU_EN.book Page 44 Friday, February 8, 2008 5:20 PM