JVC VN-V686WPU Security Camera User Manual


 
73
Note
Note that when
A
allow
B
is selected and all IP address fields are left blank, JPEG/MPEG4 acquisition by all
IP addresses will be denied. Restrictions are not imposed on access to the Web Settings page.
Additionally, VN-V686WPU will also deny access when instructions for transmission to the specified
IP address are sent via API.
M
emo:
To specify a specific IP address range, enter a combination of the IP address and subnet mask in the [IP
Address] item
B
field.
Define the subnet mask using a length between 8 to 30 bits.
For example, a range between 192.168.0.0 to 192.168.0.255 is denoted as 192.168.0.0/24 ([IP
Address]/[bit length of subnet mask]).
Destination
Address
Restrictions may be imposed on clients accessing VN-V686WPU using the
IP address.
A Access
Restrictions
When AdenyB is selected, acquisition of JPEG/MPEG4 via the IP address
specified for the [IP Address] item B will be denied. Restrictions are not
imposed on access to the Web Settings page.
When AallowB is selected, acquisition of JPEG/MPEG4 via the IP address
specified for the [IP Address] item B will be permitted. Restrictions are not
imposed on access to the Web Settings page.
B IP Address When a multicast address is specified and AdenyB is selected, VN-
V686WPU will deny transmission to this multicast address.
When a multicast address is specified and AallowB is selected, VN-
V686WPU will only accept transmission to this multicast address and deny
transmission to multicast addresses that are not stated in the [IP Address]
item B field.
VN-V686WPU_EN.book Page 73 Friday, February 8, 2008 5:20 PM