Filter
Top Products
98
Settings and operation of Built-in viewer
JPEG Viewer Configuration (continued)
M
emo:
●
The settings of Built-in viewer are stored in the file named Cookie.
M
emo:
Searching and deleting cookie files
●
Open [Tool]
-
[Internet Options]
-
[Advanced] of the Internet Explorer, and press the [Settings] button under
[Temporary Internet Files]. A new [Settings] will appear. Press the [View Files] button in this window. The
[Temporary Internet Files] window opens up and a list of files will be displayed. The file named
A
cgi-bin
B
in
this list is the Cookie for the built-in viewer.
●
Deleting this file deletes the view settings, and the viewer will be initialized during the next startup.
JPEG Viewer (continued)
BStream Settings (continued)
Multicast IP Address You can change the multicast IP address.
The default IP address setting is A225.0.1.1B.
Multicast Port You can change the multicast port number.
The default port number setting is A49152B.
M
emo:
●
This is enabled when
A
Start
B
is selected for the [JPEG Control] item
on the [Streaming] page.
●
Specify the same value as the parameter that is set on the [Streaming]
page of VN-V686WPU. (
A
Page 71)
C Folder Name For specifying the name of the folder in which the captured files are
stored. (When the viewer is installed: VN-V686)
D Operator Password Operator password is required to control
VN-V686WPU
and to get
preset position title from
VN-V686WPU
. To use PTZ Controller or to
display preset position title, enter operator password.
[Enter user name and password] (A Page 34)
When the operator password has been entered under other settings, it
will be displayed as ●●●●●●.
E Cancel Cancels the changed settings and closes the setting screen.
F OK Saves the changed settings.
Click the [OK] button to enable the new settings and restart the built-in
viewer after closing the setting window.
This setting screen is used to set Built-in viewer as a software on the computer, and does not apply to
settings of the VN-V686WPU unit.
When settings are changed, press the [OK] button to exit and restart the viewer.
VN-V686WPU_EN.book Page 98 Friday, February 8, 2008 5:20 PM