Filter
Top Products
51
A Mail For setting the mail environment when AMailB is specified as an [Action]A on
the Alarm page.
[SMTP] and [POP] can be used. Configure only the [SMTP] settings under
usual circumstances.
Enter the camera’s mail address as the [Send Mail Address].
Configure the [POP] settings as well if [POP before SMTP] is set to AOffB. In
addition, if AFQDNB is set for [SMTP Server], configure also the [DNS
Server] settings on the Basic page. (A Page 67)
M
emo:
What is FQDN (Fully Qualified Domain Name)?
This is a fully qualified domain name that indicates a notation method of
describing the entire host or domain name on the TCP/IP network without
abbreviating.
For example, if the host name is AwwwB and the domain name is Ajvc.co.jpB,
this will be denoted as Awww.jvc.co.jpB in FQDN.
B FTP For setting the FTP environment when AFTPB is specified as an [Action]A
on the Alarm page. This is common with the FTP environment when using
the periodic FTP on this page.
When [Directory] is left blank, FTP transfer will be performed to the home
directory of the FTP server. To enable FTP transfer to a directory below the
home directory, set the corresponding directory name in [Directory].
Delimit the directory using A/B.
Example: subdir1/subdir2
Destination directory of FTP transfer will be dependent on the FTP server if
A/B is added at the beginning.
Setting [Periodic FTP] to AOnB enables transfer of the latest JPEG images to
the FTP server at regular intervals. Specify the interval in seconds for
[Periodic FTP Interval].
File name: Select a type from the two types of periodic FTP file names.
When AAutoB is selected, images are generated from the year, month, day,
hour, minute, second, and number.
Example: 20071114161032-001-2.jpg
When AManualB is selected, you can select a file name generation method
from the following.
●
File name containing only the character string entered in [User-defined-
name]
Example: Camera1.jpg
●
File name with the year, month, day, hour, minute, and second added to
[User-defined-name]
Example: Camera1_20071114161032001.jpg
The name of the file to be transmitted via FTP is made up of the action
number, year, month, day, hour, minute, second, number and trigger flag.
Example: 01-20070711152904-001-0.jpg
The first two digits are the action number, and the following 14 digits denote
the year, month, day, hour, minute and second.
The three digits after the first hyphen is the number of the series of JPEG
files to be sent via the FTP. The number starts from A000B. The last digit
denotes the trigger flag. This is displayed as A1B only for the JPEG file during
a trigger input, and as A0B if otherwise.
VN-V686WPU_EN.book Page 51 Friday, February 8, 2008 5:20 PM