Filter
Top Products
Connecting and Operating the Scanner
May 2002 2-13
Focusing
With the negative or mounted slide installed in the scanner, use the software
installed on your host computer to focus the scanner.
IMPORTANT: The need for focusing is partially dependent on the “depth of field.”
When the magnification is lower—for example, 0.5—the depth of
field is greater and the focus tolerance is high. As the magnification
increases, the depth of field and the focus tolerance decrease.
Therefore, it may be necessary to focus more frequently for higher
magnifications.
Scanning a Single Frame
Using the software installed on your host computer, scan the negative or mounted
slide.
Shutting Down the Scanner
Follow this procedure when you do not plan to use the scanner for extended
periods of time, such as over the weekend.
1. Close the host software program.
2. Turn off power to the scanner.