Filter
Top Products
Using the Long Roll Accessory
May 2002 D-17
Threading the Film
1. Position the film with the data holes down and the emulsion toward the
imager.
You can thread the film from either side of the Long Roll Accessory.
2. Install the film on the spindle.
3. Thread the film:
a. around the idler arm
b. around the drive roller
c. between the aperture and the clamp, keeping the film in the track (grasp
the film on either side to locate the film in the track)
d. around the drive roller and idler arm
P192_1550BC
data holes
emulsion side
P192_1550BCA
P192_1551BC
spindle
idler arm
drive roller
aperture
clamp
P192_1551BCA