Filter
Top Products
Introduction and Overview
May 2002 1-5
Recommended Configuration of the Host Computer
The scanner is only certified to communicate with Windows NT and Windows
2000 platforms with the following configuration.
IMPORTANT: To ensure proper operation of the scanner, use the Ultra-Wide
SCSI board provided with the scanner.
Built-in SCSI interfaces in some computers may interfere with the
provided Ultra-Wide SCSI board.
Host Computer Hardware Requirements
A SCSI cable connects the host computer to the scanner. This interface enables
the transfer of digital image data from the scanner to the host computer.
If you follow the recommended host computer hardware requirements, you can
expect higher performance.
IMPORTANT: The SCSI board must be dedicated to running only the HR Film
Scanner.
Recommended Software Requirements
• Windows NT 4.0 or Windows 2000, Service Pack 6 or 6A for using the
scanner and software
• Microsoft Internet Explorer 5.01 or higher
• Adobe Photoshop 5.5 or higher for validating operation of the scanner
Minimum Recommended
Dual Pentium III/600 MHz Dual Pentium III or IV/1.2 GHz
512 MB memory 1 GB memory
10 GB available disk space 40 – 60 GB available disk space
CD-ROM drive
19- to 21-inch Color Monitor
24-bit Color Display Card with at least 16 MB video RAM
Dedicated SCSI host adapter (provided with scanner)
High-speed internet connection