Filter
Top Products
Using the Service and Assembly Module (SAM)
A-2 May 2002
Installing the Service and Assembly Module (SAM)
Software
1. Load the SAM CD.
2. Run setup.exe from the SAM CD.
3. Respond to the prompts in the installation program.
You must provide the program location and the name of the program menu
item.
4. When installation is complete, reboot your host computer.
5. Remove the CD and store it in a safe place.
Backing Up Scanner Files
IMPORTANT: It is essential that you back up the scanner files before using SAM.
1. Open SAM.
2. From the Operations window, click the Backup & Restore tab.
3. Click Backup to back up the critical scanner files.