Leica 18485 Digital Camera User Manual


 
Wi-Fi/NFC
Wi-Fi
®
Function and NFC Function
- 172 -
The camera cannot be used to connect to a public wireless LAN connection.
Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a
wireless access point.
We strongly recommend that you set an encryption to maintain information security.
We recommend that you use a fully charged battery when you send pictures.
When the battery indicator is flashing red, the connection with other equipment may
not start or the connection may be disrupted. (A message such as [Communication
error] is displayed.)
When sending images on a mobile network, high packet communication fees may be
incurred depending on the details of your contract.
Pictures may not be completely sent depending on radio transmission conditions. If
the connection is terminated while sending pictures, pictures with missing sections
may be sent.
Do not remove memory card or battery or move to an area without any
reception while sending images.
The monitor display may become distorted for an instant while connected to the
service, however this will not affect the image being sent.
[Airplane Mode]
To disable Wi-Fi connection: Set [Airplane Mode] to [ON]
Select [Airplane Mode] from the [Setup] menu, and then press
[MENU/SET] (→52)
Use the cursor buttons to select [ON], and then press
[MENU/SET]
Electromagnetic fields from the camera can affect instruments and meters. In airplane
cabins or in other restricted areas: Set [Airplane Mode] to [ON]