Filter
Top Products
Miscellaneous
Troubleshooting
- 231 -
About the Wi-Fi function (continued)
It takes time to transmit an image.
●
Is the size of the image too large?
→ Transmit after dividing the motion picture with [Video Divide] (→161).
→ Reduce the image size at [Size] (→199), and then send.
●
It may take longer time to transmit when distance to the wireless access point is far.
→ Transmit closer to the wireless access point.
There is an image that could not be transmitted.
●
Is the size of the image too large?
→ Divide the motion picture using [Video Divide] (→161).
→ Reduce the image size at [Size] (→199), and then send.
I have forgotten the password for the Wi-Fi.
→ Execute the [Reset Wi-Fi Settings] in the [Setup] menu. (→61)
→ However, all the information you have set on the [Wi-Fi Setup] menu, will be reset.
Transmission of the image fails midway.
●
Is the size of the image too large?
→ Transmit after dividing the motion picture with [Video Divide] (→161).
→ Reduce the image size at [Size] (→199), and then send.
→ The image cannot be transmitted when the battery indicator is flashing red.
Motion pictures cannot be transmitted.
●
The file format of the motion picture that can be sent differs depending on the destination. (→185)
●
Is the size of the image too large?
→ Transmit after dividing the motion picture with [Video Divide] (→161).
I cannot connect using the NFC function.
●
The smartphone is not NFC compatible.
This function can be used with NFC compatible devices with Android (2.3.3 or above).
●
Is the NFC function on the smartphone turned off?
●
The [NFC Operation] on the camera is set to [OFF]. (→200)
●
The camera has a hard time recognizing some smartphone models. If it is not recognized, slowly
shift the smartphone while it is next to the camera.