Filter
Top Products
Connecting to other devices
Printing
- 213 -
Preparation:
• When printing pictures from the built-
in memory, remove the memory card
• Adjust the print quality or other
settings on your printer, as needed
• Turn on camera and printer
Connect camera and printer
• Do not use any other USB cables except a genuine Leica USB cable of the
supplied type.
Using cables other than the above may cause a malfunction.
Use the cursor buttons on the camera to select
[PictBridge(PTP)], and then press [MENU/SET]
Use the cursor buttons to select a picture to print, and then
press [MENU/SET]
Use the cursor buttons to select [Print start], and then press
[MENU/SET]
(Print settings (→216))
■
To cancel print
Press [MENU/SET]
Make sure the plug is aligned correctly and that it
is inserted straight.
(Otherwise the connectors may be bent out of
shape which will cause trouble.)
Also, do not insert into the wrong socket. Doing so
may cause damage to the camera.
• Do not disconnect the USB cable
when the cable disconnection icon
is displayed (may not be displayed
with some printers).
USB cable
You can connect directly to a PictBridge-compatible printer for printing.
• Some printers can print directly from the camera’s memory card.
For details, see the instructions for your printer.