Filter
Top Products
Miscellaneous
Troubleshooting
- 234 -
Others
The menu is not displayed in the desired language.
●
Change the [Language] setting (→64).
The camera rattles if shaken.
●
This sound is made by the lens movement and is not a fault.
The red lamp is illuminated when pressing the shutter button halfway in dark locations.
●
[AF Assist Lamp] is set to [ON] (→136).
The AF Assist Lamp is not illuminated.
●
[AF Assist Lamp] is set to [OFF] (→136).
●
In bright locations the lamp is not necessary and therefore it does not light up.
The camera gets hot.
●
The camera may become a little warm during use, but this does not affect performance or quality.
The lens makes a clicking noise.
●
When brightness changes, the lens may make a clicking noise and the monitor or viewfinder
brightness may also change, but this is due to aperture settings being made.
(Does not affect recording.)
The clock is incorrect.
●
The camera has been left for a long period.
→ Reset the clock (→24).
●
A long time was taken to set the clock (the clock will be behind by the same lapse of time).
The complete zooming range is not accessible.
●
If the zoom ratio stops at 3x, [Macro Zoom] has been set. (→80)
File numbers are not recorded in sequence.
●
File numbers are reset when new folders are created (→211).
File numbers have jumped backwards.
●
The battery was removed/inserted with the camera turned on.
(Numbers may jump backwards if folder/file numbers are not correctly recorded.)