Leica 18485 Digital Camera User Manual


 
Basics
Using the [Setup] menu
- 64 -
• For the setting procedures of the menu. (→52)
[Format]
Use this mode when [Built-In Memory Error] or [Memory Card Error] appears, to format
the built-in memory or the memory card.
When a card/the built-in memory is formatted, the data cannot be restored. Check
the content of the card/the built-in memory carefully before formatting.
To format the built-in memory, remove the memory card.
(Only the inserted card will be formatted; the built-in memory will only be formatted if
no card is inserted.)
All protected pictures and other picture data will be deleted.
Do not turn off the camera or perform other operations during formatting.
Always format the cards with this camera.
Formatting the built-in memory may take several minutes.
If you cannot format, contact your dealer or your nearest Leica Customer Care
department.
[Language]
Changes display language.
Sets the language displayed on the screen.
[O.I.S. Demo.]
Extent of camera shake is shown on graph (estimate).
Extent of camera shake
Extent of camera shake effect after correction
During demo screen display, the Optical Image Stabilizer switches ON and OFF every
time [MENU/SET] is pressed.