Filter
Top Products
128
Connecting to a Computer
Connecting to Televisions, Computers and Printers
Transferring Pictures from the Camera to a Computer
1 Start the computer to which Nikon Transfer was installed.
2 Be sure that the camera is off.
3 Connect the camera to the computer using the supplied USB cable.
4 The camera is automatically turned on.
The power-on lamp will light or blink (A 131).
The camera monitor remains off.
If charge for the battery inserted into the camera is low, the computer may not
recognize the camera. If the camera is not recognized, pictures will not be transferred.
When battery charging starts automatically using power supplied by the computer, wait
until battery charge has reached a sufficient level to begin transfer.
Windows Vista
When the AutoPlay dialog is displayed, click Copy pictures to a folder on my
computer using Nikon Transfer. Nikon Transfer will start. To bypass this dialog in the
future, check Always do this for this device.
Windows XP
When the action selection dialog is displayed, select Nikon Transfer Copy pictures to
a folder on my computer and click OK. Nikon Transfer will start.
To bypass this dialog in the future, check Always use this program for this action..
Mac OS X
Nikon Transfer will start automatically if Yes was selected in the Auto-Launch setting
dialog when Nikon Transfer was first installed.