Filter
Top Products
54
Adjusting the Camera Settings in Shooting Mode
More on Shooting
To disable the focus area selection, tap q displayed at the left side of the monitor.
If a position at which focus cannot be acquired
is tapped, H will be displayed in the monitor.
Tap another position inside H.
3 Press the shutter-release button to take a
picture.
Press the shutter-release button halfway to acquire focus and exposure
and press it all the way down to release the shutter.
B Notes on Touch AF/AE
• R Touch AF/AE is disabled in c Landscape, h Sunset, i Dusk/dawn, j Night landscape,
m Fireworks show, and p Panorama assist scene modes. The touch shooting setting is fixed
at K Touch shutter.
• In some rare cases, shooting subjects with which autofocus may not perform as expected, the
subject may not be in focus (A31).
• There may be functions with which this setting cannot be enabled. See “Camera Settings That
cannot be Applied Simultaneously” (A 75) for more information.
C Touch Shooting Setting
The touch shooting setting applied in A (auto) mode is stored in the camera’s memory even after
the camera is turned off, and reapplied the next time A (auto) mode is selected.
A (auto) mode, d Sports,
f Party/indoor, g Beach/
snow, k Close-up, u Food,
l Museum, n Copy, and
o Backlight scene modes
Focus and exposure are set for the area tapped.
b Portrait and e Night
portrait scene modes
Only a border displayed by the face priority function
can be selected. When the camera recognizes more
than one face, tap a face framed by a single border to
set focus and exposure for that face. The single
border changes to a double border.
Shooting mode Touch AF/AE operation
9
9