Filter
Top Products
16
First Steps
First Steps
Inserting the Battery
Insert a Rechargeable Li-ion Battery EN-EL12 (supplied) into the camera.
• Charge the battery before the first use or when the battery is running low
(A 16).
1 Open the battery-chamber/memory card slot
cover.
Slide the cover latch to Y side (
1
) and open the cover
(
2
).
2 Insert the battery.
Confirm that the battery’s positive (+) and negative (–)
terminals are oriented correctly as shown on the label at
the battery chamber opening, and insert the battery.
Use the battery to push the orange battery latch up (
1
)
as the battery is inserted (
2
).
The battery latch will spring back into place when the
battery is fully inserted.
B Inserting the Battery
Inserting the battery upside down or backwards
could damage the camera. Be sure to check that the
battery is in the correct orientation.
3 Close the battery-chamber/memory card slot
cover.
Close the cover (
1
) and slide the cover latch (
2
) to Z
side.