Filter
Top Products
144
Basic Camera Setup: The Setup Menu
Setup Menu
3 Tap I.
The travel destination screen is displayed.
4 Tap A or B to choose the travel
destination time zone and tap
Z.
If daylight saving time is in effect, tap H to
enable daylight saving time function. W is
displayed at the top of the monitor and the
camera clock is advanced one hour. Tapping
H toggles the daylight saving time function
on and off.
While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.
B Note on the Clock Backup Battery
The camera clock is powered by the clock backup battery. The clock battery charges when the main
battery is inserted or an AC adapter is connected, and can provide several days of backup power
after about ten hours of charging.
C w Home Time Zone
• To switch to the home time zone, tap Home time zone in step 2.
• To change the home time zone, tap Home time zone in step 2, and complete steps 3 and 4.
C Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time function on or off from the
time zone selection screen displayed in step 4.
D Imprinting Date on Pictures
Enable date imprint in shooting mode (A74) after the date and time have been set or from the
Date imprint option (A 146) in the setup menu. When the Date imprint option is enabled,
pictures will be recorded with shooting date imprinted on them.
15/11/2009 15:30
Time zone
Home time zone
Travel
destination
Londo n, Casablanca
Travel destination
Tokyo
Seoul
00:30 +09:00