Filter
Top Products
11
Preparation
Press the MODE and SEL buttons simultaneously
To recall the underexposure value in the TTL/D-TTL auto flash
mode
(p. 31)
.
Press the MODE and ON/OFF buttons simultaneously
for approx. 2 sec.
To reset all settings, including custom settings, to their
default settings (except the distance unit selected in m/ft).
Control buttons
2
3
4
5
6
1
1 h button
Press to test fire the flash (p. 18).
2 a button
Press to set the flash mode (p. 28).
3 g button
• Press to select these functions:
Flash output level compensation,
aperture, number of repeating
flashes per frame, frequency, and
flash output level. The selected
item blinks and can be set using
the e and f buttons.
• Press for approx. 2 sec. to display
the Custom settings mode (p. 12).
4 e button/f button
Press to increase or decrease values.
5 c button (wide)/
d button (tele)
Press to change the zoom-head
position (p. 24).
6 b button
Press for approx. 0.5 sec. to turn
the power on and off.
+
+