Filter
Top Products
86
lWireless multiple flash shooting in A (auto) mode
Wireless multiple flash shooting
1
Set the camera’s exposure mode to Aperture-
Priority Auto (A) or Manual (M).
2
Set up all Speedlights as master and slave
flash units.
3
Set all SB-80DX units (used as the master and
slave flash units) to the Wireless flash mode.
4
Press the a button on the slave flash unit to
activate the A (auto) mode.
5
Set the flash mode of the master Speedlight to
the TTL auto flash mode.
nWith Nikon Digital SLRs cameras, wireless flash
cannot be set, if the flash mode is set to D-TTL auto
flash. In this case, set the flash mode to Auto
Aperture or Non-TTL auto flash.
6
Confirm the aperture and flash shooting distance
range as in normal TTL auto flash shooting, then
shoot.
nSee page 28 about the TTL auto flash mode.
nSee pages 42, 40 about the Auto Aperture or Non-
TTL auto flash mode with Digital SLRs cameras.
nFlash operation can be confirmed by the ready-light
or the beeping sound (p. 89).