Filter
Top Products
49
Detailed operation
1
Set the camera’s exposure mode to Manual (M).
2
Press the a button to set the flash mode to
the H Repeating Flash mode.
3
Press the g button and the flash output level
starts blinking. Press the e or f button to
increase or decrease the values.
nThe flash output level blinks during adjustment and
stops after 8 seconds unless an adjustment is made.
The last blinking number is the one automatically set.
4
Press the g button and the flash output level
stops blinking.
nAfter that, the frequency starts blinking.
5
Repeat the procedures above to set the
frequency and the number of repeating flashes
per frame.
Frequency (Hz)
Number of repeating flashes per frame