Filter
Top Products
87
Technical operation/Effective Speedlight placement
lWireless multiple flash shooting in M (manual) mode
1
Set the camera’s exposure mode to Aperture-
Priority Auto (A) or Manual (M).
2
Set up all Speedlights as the master and slave
flash units.
3
Set all SB-80DX units (used as the master and
slave flash units) to the Wireless flash mode.
4
Press the a button on the slave flash unit
to activate the M (manual) mode.
5
Set the flash mode of the master Speedlight to
the Manual flash mode.
nThe Non-TTL auto flash (A) mode can also be
selected on the wireless slave flash unit. In this case,
the flash unit controls the flash output based on the
aperture and ISO sensitivity which are set on the
slave flash unit, and automatically stops firing in sync
with the master flash unit (p. 40).
6
Confirm the aperture and flash shooting distance
as in normal Manual flash shooting, then shoot.
nSee page 45 about Setting the flash output level.
nSee page 46 about the Manual flash mode.