Nikon SB-80DX Camera Flash User Manual


 
12
Item Setting (Bold: default)
Wireless flash mode*
1
(p. 84) OFF (canceled) ON (activated)
Sound monitor*
2
in the wireless L (sound on) M (sound off)
flash mode (p. 89)
AF-assist illuminator (p. 62) AF ILL (activated) NO AF ILL (canceled)
Standby function (p. 19)
Selecting the distance unit (m, ft) (p. 13)
m (meters) ft (feet)
Canceling the power zoom function (p. 25) OFF (activated) ON (canceled)
Emergency mode*
3
(p. 98) OFF (not possible) ON (possible)
LCD panel illuminator (p.13) ON (turn on) OFF (turn off)
40 (sec.) 80 (sec.) 160 (sec.) 300 (sec.)
- - - - (The standby
function canceled)
Custom settings
The SB-80DX can easily set, activate, or cancel various operations using the
Custom settings function as shown below.
Control button quick
reference
Procedures for Custom
settings, recalling the
underexposure value in the
TTL auto flash mode, and
resetting all settings to their
default settings are shown
in the Control button quick
reference chart on the back
of the built-in bounce card.
*
1
No display appears when the SB-80DX is attached to Digital SLRs cameras.
*
2
The display appears when the wireless flash mode is set to ON.
*
3
No display appears when the built-in wide-flash adapter is not used.
AUTO (the SB-80DX turns off
when the camera’s exposure
meter turns off.)