Filter
Top Products
67
Technical operation/Effective Speedlight placement
unattractive shadows)
1
Set the camera’s exposure mode to Aperture-
Priority Auto (A) or Manual (M).
2
Set the camera’s metering system to Matrix
Metering Y or Center-Weighted Metering W.
3
Set the flash mode to TTL/D-TTL auto flash,
or Non-TTL auto/Auto Aperture flash.
5
Adjust the flash head.
4
Set the camera’s aperture.
nRefer to page 68 for setting the aperture.
6
Make sure that the ready-light is on,
then shoot.
nWhen the flash has fired at its maximum
output and underexposure may have
occurred, the ready-light on the SB-80DX
blinks for approx. 3 sec. To compensate, use
a wider aperture or move closer to the
subject and reshoot.